Stainless Steel Electronic Sparkle Welder Sold By PC

The Machine is used for gold, silver, platinum and palladium, steel and so on. This allows you to fix the work piece prior to solder, also possibly to create stable and long-lasting connections, especially in places where soldering is not possible. The machine can be link argon shield .The welding points are silky-smooth and uniform in size and texture. Description: Dimension: 285x165x130mm Weight: 6kg Voltage: AC 220V Ampere: 0.4A Power: 95W Ampere for Welding:0.5-10A Continuous Adjustable Accessory: Machine 1PC, Foot Pedal 1PC, Cable 1PC, Forceps Clamp 1PC, Tungsten Needle 1PC Instruction: 1. Connect the red cord to red terminal, the black cord to black terminal that on the board and put the plug to the appropriate socket. Tighten the nut. 2. The argon links argon input port, crossing the reducing valve, and adjust the reducing valve to minimum (fit for argon shield machine). 3. Connect the power, and turn on the main switch.. 4. During working, use the forceps clamps on black cord to tighten the welding parts, and turn to close to the pin on the red cord. Distance decided by size and shape of the parts, best to be 0.5-1mm, please note that parts can not come into contact with pin. Before and during use, the discharge spot of pin must be sharpened up to keep the well condition. 5. During welding you can adjust the current output, (Rough adjustment degree is 1-1.5, fine adjustment degree is 7-8) in accordance with size of parts, size of welding spot and requirement of craft. Adjust the current output to optimum by the output holder located on. 6. Pls step on the foot pedal, then move away , the welding is finished. Attention: 1. Press the footswitch quickly then immediately release. Holding the footswitch closed will damage the welder electronics. 2. This machine is precision equipment, pls use it carefully. 3. The spark is harmful for the eyes , pls protect your eyes during work. 4. When stepping on the foot pedal, don’t touch the pins and the metal parts of the tweezers by hand. 5. If someone is not a professional worker, pls don’t take apart and repair it , the inner voltage of machine is very high.